āž” Quail Hatch Along🄚

Lost a couple of chicks my last hatch, in the shell. They pipped but never got out. I was running the humidity at 70-75 for the last 3 days... I'm guessing they drown when they pipped.
Either that or they became 'stuck', unable to zip, couldn't turn in the shell.
 
humidity commensurate with outdoor humidity is best!!! I’ve been hatching lately with broody silkies and that has taught me a lot about my individual humidity levels!!!:old
Yep, in the wild, usually the humidity in the soil is around 35%, if it's lower they won't hatch out a clutch. That's why in a dry spring/year or a drought, the hatch rate of wild birds is so low.
 
My eggs are due to arrive tomorrow. I have the temperature holding steady between 99.1 and 100.1 degrees.

The humidity is the problem. If I add a pipette of water, the humidity goes up as high 65%, then drops steadily until it's as low as 12%. With one pipette, this cycle takes about 1-2 hours. If I use 2 pipettes of water, it may take 2-4 hours. I imagine that this constantly changing humidity is not going to be good for the eggs.

I could keep the humidity semi stable (high of 40-50%, low of 25-30%) if I add about half a pipette once an hour or so, but I work and am going to need to sleep. Should I try blocking off the tiny vents on the bottom of the incubator? That will affect the airflow, though, so I haven't tried that yet.
 
just candled the 90 and trashed 22 clear giving me avg 75% fertility. set celadon, sparkly, and 15 of jumbos (all the room I had in the big bators) will set other 15 jumbos once weekend hatch completes and may put in a few homegrowns too in order to fill empty spots!
 
My eggs are due to arrive tomorrow. I have the temperature holding steady between 99.1 and 100.1 degrees.

The humidity is the problem. If I add a pipette of water, the humidity goes up as high 65%, then drops steadily until it's as low as 12%. With one pipette, this cycle takes about 1-2 hours. If I use 2 pipettes of water, it may take 2-4 hours. I imagine that this constantly changing humidity is not going to be good for the eggs.

I could keep the humidity semi stable (high of 40-50%, low of 25-30%) if I add about half a pipette once an hour or so, but I work and am going to need to sleep. Should I try blocking off the tiny vents on the bottom of the incubator? That will affect the airflow, though, so I haven't tried that yet.
have u tried chunking up sponges and wetting then adding/subtracting pieces until you achieve the desired humidity?? i’ve been doing that method in my janoelle and it holds stable for longer periods of time.
 

New posts New threads Active threads

Back
Top Bottom