Need roof over 4x5 run

CarlaCo

Songster
Aug 29, 2022
173
343
131
Johnson City, NY (Town of Maine, NY)
Hi all. Still problem solving as we go on this very pretty, well-constructed, over-priced, POORLY designed, supposedly Amish-built coop. (I should make that my tag linešŸ˜‚)

We had several days of heavy rain, and I had to concoct a roof over the mini 4x5 run so the food stayed dry and the babies wouldnā€™t ge too wet. It felt like camping in the rain nightmares from the past with tarps and scrap plywood and rocks to hold stuff in place. The dilemma for this coop is once again tying to keep it mobile. It is sooo heavy as is. The stupid brochure actually showed two little Amish girls like 10 and 8 years old with their Little Hose on the Prarie get ups holding the wheel barrow handles as IF they could move this thing an inch. šŸ˜”šŸ˜”šŸ˜”šŸ˜”šŸ˜”

For us, even the smallest mole hill in the lawn means two people are needed, one to push and one to pull or two to push to move the thing. I bought a large lightweight metal run that can be moved easily (it hasnā€™t come yet) so we wonā€™t have to move the coop but a few times a month. But the idea of adding more weight for a roof makes me ill. So it needs to be lightweight or easily lifted and removable.

My present thought is two trusses (maybe with something lighter than 2x4ā€™s?) then a really thin like 1/8ā€ birch sheet? somehow matching the peak but fitting under the coop eave roof which is only a lousy inch or so overhang. (Why were they so stingy with overhang?šŸ¤¬šŸ˜”šŸ¤¬ - during the storms a lot of rain was going in the coop door way.) then over the top of that some lightweight corrugated stuff. Any have any ideas?
 

Attachments

  • 4C2B1F50-C170-44DA-9FE5-32A5D107A1CB.jpeg
    4C2B1F50-C170-44DA-9FE5-32A5D107A1CB.jpeg
    661.6 KB · Views: 25
  • 569D507C-F835-4B27-ACE7-BC2E5889431C.jpeg
    569D507C-F835-4B27-ACE7-BC2E5889431C.jpeg
    823.3 KB · Views: 10
Having trouble picturing this. Is it a flat roof? Any way you could copy the second pic and draw the lines for the 2x6ā€™s and the purlins?šŸ˜ How will it stop water from going to drop hole? I agree a tarp canā€™t be a long term solution. And what you propose would be pretty light. I just wonder in our wind up here if it would get ripped off vs a peaked configuration.
Black is angle ripped 2x6 extending out 6+ inches past the end of the "run".
Red are 1x ripped down 2x6 set 16" OC to form purlins with as much overhang left/right as the roofing will allow.
1662761764705.png


Polycarbonate roofing, 26"x12'
Cut in half with the blade turned around backwards to make two panels 6' long.

1662761964832.png


Screw closure strips over the purlins.
1662762028491.png


Secure roofing over the closure strips with gasket sealed panel screws over each high spot on the roof panel. I have a huge bag of these left over from the polycarb roof I installed on my run.
1662762090032.png
 
Last edited:
So far so good! Following Tonyaā€™s plan, Hubby and I are building the mini roof. Posting a few pics while we take a break waiting for the rain to stop. We cut the rafters diagonally on the table saw by screwing the 1x6 to another board at the right angle and ripped it beautifully. Ripped a couple 6ā€™ 1x4ā€™s for the purlins. I slapped some stain on and sprayed the plastic wavy doohickeys (not the official namešŸ˜) black. We cut two 8ā€™ palruf pvc panels in half and weā€™ll use three to cover the roof. Iā€™ll post again when itā€™s done!
 

Attachments

  • BD7CA5FF-A3C2-4111-BFD5-B4A7AC45F11D.jpeg
    BD7CA5FF-A3C2-4111-BFD5-B4A7AC45F11D.jpeg
    91.5 KB · Views: 5
  • D40C9624-08F5-4C3B-9F56-5E8693FD4C6D.jpeg
    D40C9624-08F5-4C3B-9F56-5E8693FD4C6D.jpeg
    114.6 KB · Views: 4
  • F9A69DEB-CC5A-48B6-B5B0-2A5604164143.jpeg
    F9A69DEB-CC5A-48B6-B5B0-2A5604164143.jpeg
    106 KB · Views: 4
  • 1D6E9E90-88CF-4F7E-9749-E847B8104C3F.jpeg
    1D6E9E90-88CF-4F7E-9749-E847B8104C3F.jpeg
    119 KB · Views: 5
  • 1AFFFB0C-387B-4B96-86E9-D3705FCCE168.jpeg
    1AFFFB0C-387B-4B96-86E9-D3705FCCE168.jpeg
    98.1 KB · Views: 5
Yeah! The roof is done! It feels so good to be rid of our menagerie of boards, tarps and bungee cords!
We would have over hung more but the pieces are only 8ā€™ and we had to half them so thatā€™s where they landed.
Thanks to all for helping us brainstorm this and special thanks to DobieLover for the design!
 

Attachments

  • C1ADB5FC-C19E-439F-8B4B-E0A65787324B.jpeg
    C1ADB5FC-C19E-439F-8B4B-E0A65787324B.jpeg
    947.7 KB · Views: 5
We talked a bit about this when I was there. Adding two ripped down 2x6s to the longer sides with 3 or 4 1x2 purlins and polycarbonate roofing with about 6 in overhang at the sides and the end the handles are on will help immensely. Yes, it will add some weight but tarps are just going to leak.
 

New posts New threads Active threads

Back
Top Bottom