Ali707
Songster
I am having the same readings you are, although I do not have the Hygrometer When I fill trough 1 it stays at about 46-47% humidity on the monitor on the Genesis. After about 2 days the humidity drops to........right now it is at 36%. The notes on the instructions said to keep the humidity between 45-55% and then 55-65% at lock down. Well, if I go by that note, then it is staying at about 47% based on only the Genesis reading, and after about 2 days needs more water to get back up to 47ish %. Since Ron and others have said humidity wasn't completely critical in the beginning I haven't been too worried about it. The temps I am about 1 degree off between the Genesis reading and the one I put in there. So I bumped mine up just a little because Quail eggs said they need to be at 100 degrees and using the factory setting of 100, the temp was reading about 99.5 which would have been perfect for chicken eggs, except at egg level it was about 1 degree less.....?Question for those of you who have a Genesis 1588 incubator. I have had my new one plugged in with water in trough 1 for over 5 hours. I have 2 separate thermometer/hygrometers to check the accuracy of the unit. Temperatures on the thermometers and the unit are all within 1 degree (99 to 100 degrees) so that is good. The humidity reading on the incubator is 46% but both hygrometers read 61%. I am currently calibrating both hygrometers with the salt water slushy in a bag method. Would you recommend that I go ahead and just run it with the factory settings? I do have the red vent plug removed. Is that right?

This has been driving me a little nuts for the last 5 days but I am trying not to worry about it too much. These aren't the chicken eggs I have coming on April 9th, so I am hoping to get this all worked out before then. If any hatch in a couple of weeks, I will consider myself lucky.

With my chicken eggs, I really hope to get it worked out a little more decisively about what the readings really are.