post your chicken coop pictures here!

I know what you mean by over-kill!!
lau.gif
I'm attaching my 1/2" hardware cloth with wood screws and fender washers...I think I'm putting them in about every 10-12" .. had to pitstop at Ace Hardware today and get another box of washers and screws. The guys there get a laugh out of me when they see me coming..."uh-oh, here comes the crazy chicken lady again!" ....snicker....
celebrate.gif
gig.gif
 

Our coop we still ain't quit done yet!! It did withstand an owl! The day after we put our babies out in it we found a dead owl that broke it's neck when he crashed into it.
I hate to see any wildlife dead but that had to be one stoooopid owl - I thought they had expert vision to see the tiniest things - how did he miss seeing something that BIG! LOL

Also if you've been reading this thread we want to know why you're using flimsy poultry wire against predators that probably lurk in that wooded area in the photo. Raccoons, weasels, coyotes, foxes, dogs, bobcats, etc can easily push on poultry wire which is not interlinked and easily comes apart from itself when pushed on. Also you'll need to bury 1/2 inch hardwire into the ground and around the pen to deter digging night critters if you want to protect your babies from wildlife you never knew you had until you got poultry.

Smiles - we just want to help. BTW nice coop framework.
 
Last edited:
We are putting the finishing touches on our coop. The majority of the materials (90% of the wood) was found for free on Craigslist. We used old fence pickets for the siding. I haven't decided if I want to paint, but for now I am liking the 'rustic' look.
smile.png
We bought our house a year ago, which came with an existing dog run/kennel that we converted for the chickens (because our dog is far too spoiled to use it
roll.png
) The previous owners had also built a rabbit hutch, which is where we got the panels to make the top/cover of the chicken run. DH created the coop design by himself. It took about a month's worth of days off to build. Any materials we had to buy new we found as cheap as possible. A few people have commented about how "fancy" the floor is -- it was the cheapest stick-on tile we could find at Lowe's. The whole floor cost a total of $6. We used vinyl panels for the roofing, and the window is a 12x12 shed window. There is one 12x12 vent on the door, and another larger vent on the back wall of the coop (not pictured).

We have currently have five chicks (almost 3 weeks old) who will hopefully move to the coop in the next few weeks!









The inside, complete with mirror and farm artwork
lol.png




With leftover wood, DH also created a "chicken cabana" for dust bathing.
smile.png

 
That's j
I hate to see any wildlife dead but that had to be one stoooopid owl - I thought they had expert vision to see the tiniest things - how did he miss seeing something that BIG! LOL

Also if you've been reading this thread we want to know why you're using flimsy poultry wire against predators that probably lurk in that wooded area in the photo.  Raccoons, weasels, coyotes, foxes, dogs, bobcats, etc can easily push on poultry wire which is not interlinked and easily comes apart from itself when pushed on.  Also you'll need to bury 1/2 inch hardwire into the ground and around the pen to deter digging night critters if you want to protect your babies from wildlife you never knew you had until you got poultry.

Smiles - we just want to help.  BTW nice coop framework.
ust a thin line of woods in between our yard an the neighbors. Hey it held up against the owl he hit the wire and all it did was dint it in. He has spent a good $1000 on that thing so far and he haven't had any critters get in. They been in there for over two months now.
 
That's j
ust a thin line of woods in between our yard an the neighbors. Hey it held up against the owl he hit the wire and all it did was dint it in. He has spent a good $1000 on that thing so far and he haven't had any critters get in. They been in there for over two months now.

I know, I know. Wood is so expensive. And I don't have anybody to do it for me. Except to pay them. And I do. I thought I had Ft Knox and still had a mink get in so I kept going on predator proofing.
barnie.gif
 
Quote: Yes, but remember....that was just an owl flying in. Did you know that raccoons and foxes can tear up chicken wire like it was butter? It's true. You might want to re-think the wire you're presently using...jmho
 
Well i'll show you a outside formation.


The roost are to keep them having fun!

I put waters by the feeders just in case somebody gets TOO much food in their crill.
 
Last edited:
Last edited:
Mine isn't beautiful but I think I only spent around $100 because I had some of the material. I didn't really have a plan just got started. (That's just how I work. Drives my husband nuts) so I built it by myself. It is big enough for 12 or so chickens. I used pallets.






[IMG ALT="Back open
Made for gathering eggs and cleaning"]https://www.backyardchickens.com/content/type/61/id/6461619/width/350/height/700[/IMG]
Absolutely love it..You are very talented! LOL..,,,had a man building me before he ...just got can't get around to it (been going to since 1st of Mar before I got chicks)...so now I'm having to finish it. My DGD will be here tomorrow evening.. she has chickens, etc and will help me a lot. Can't wait!! Got materials...just need some help..! Got roof on, got a window put in, got nest boxes done/egg door done. Got to finish wiring over the ventilation areas, put on a pop door, a people door and redo the run. Oh yea, because it is soooooooooooooooo well ventilated (boards are bowed and old)..got to wire the inside walls.....LOLOL Got some pullets waiting ...hope to get them in the coop before they begin laying.! Such an adventure!!
 

New posts New threads Active threads

Back
Top Bottom