At the moment no. I never got physical science, so the terms may as well be Greek. However, once I start reading up on the things, it will probably start making sense.

My knowledge of electrical stuff comes from my dad telling me over the phone how to change a receptical (he had to explain what that was). The black goes to the black, white to white, copper is the ground and after tightening the screws, wrap electrical tape around it, covering the screws (so no one gets zapped if they grab it while it's hot).With the breaker box turned off. Jumper cables for the car battery, red to red and black to black or to the metal frame.
I skipped physics and chemistry for language, I knew about jumper cables, that’s it. The diagrams in the pdfs is what helped me understand it: all electricity wants to go to the earth, like lightning bolts. Unless you are in the path of it’s way to the earth, it won’t affect you. That’s why birds on an electric wire don’t get zapped, there’s no connection to ground. So when you send positive electricity out along a fence wire, it has no way back to ground and zapping anyone until someone with a connection to ground touches it.
You can still run your fence, you’re just limited as to where you can put your ground.
I probably was a step behind even that when I started. I suggest you hang out on the Premier One website. They have a lot of instructional videos and articles. Their customer service is also genuinely helpful.
Same is true of Kencove whose fence I actually purchased, but they have slightly fewer instructional stuff.
I had to call them when I was setting it up because I had some basic questions and they were very happy to spend time on the phone with me.

There is also quite a lot of good stuff on YouTube like this.
https://www.zarebasystems.com/learning-center/how-electric-fencing-works

Sorry if this is too basic for you - but it helped me visualize the whole thing!
View attachment 3314848
This! Yes the Circle Of Zap made sense with diagrams like this!
The same principles apply - the animal must touch both a live wire and a ground wire to get a shock.
If your soil tends to dry there are tricks to get it damp like locating the ground rod in the path of a gutter run-off.
Here is the PremierOne article on the topic: https://www.premier1supplies.com/sh...X2VZf4_GJDpZk_8UARRgNqFU_whYk96xoCizIQAvD_BwE

If you really are very dry, or on solid rock so you can't drive a ground rod into the ground you can do without one as long as you pair the live wires with ground wires. This is #2 on the PremierOne list above.

They even sell net fences with return ground wires built in. It is called positive/negative fencing (Posi-Neg). Basically they alternate the wires so every other wire is 'live' and every other wire is 'ground'. Here are two easy to understand videos from Kencove to explain it.



And a diagram that explains how it works.
View attachment 3314958

And yes, I really researched all this before erecting my fence!
In the end it was all way easier than I expected (not quite as simple as the videos show - but close!).
I forgot about the Posi-Neg fences. They create their own complete circle and so when a critter touches both wires they become part of the circuit and get a zap. This is more like the home wiring - both parts are right there. Like putting a knife into an electric outlet - yes we did that as kids for a brief spell, what idiots! - you’re holding the steel knife (very conductive) and you’re hands are conductive, so you’re part of the compete circuit.
 
A Job Mostly Done

It was time to figure out the roost. I decided to split the roost in 3. Two thirds would be the original 2x4 the third in the middle and higher is the roost from the prefab that Daisy, the greatest hen ever, and Maleficent loved so much. I had to find a way to include it. It is a little lower the high roost that Sydney and Aurora love but higher than the main roost.

20221106_165135.jpg


20221106_165139.jpg

I built the roosts without the floor installed, then took them down, installed the floor and put them back up.

20221106_165641.jpg
20221106_170350.jpg
20221106_170545.jpg


At this time it was getting dark and everyone wanted to roost. Sydney and Aurora roosted without a roof and Hattie and Betty went into nest boxes. Phyllis, Glynda, and Lady Featherington went into the Cluckle Hut. You can see in this photo I still need to put the second piece of roof up.

20221106_171635.jpg


I got the second piece of roof up and it was dark. Totally dark. No moon.

20221106_173023.jpg


Once the roof was all on, Hattie left the nest box to lay on the floor.
20221106_173116.jpg


It was still early so I decided to paint the roof by lantern.

20221106_173800.jpg
20221106_180312.jpg


I did manage to get a coating on. I bet it's ugly but if it does rain it will provide some kind of protection.

I will need to remove the second piece of roof tomorrow and glue it to the first piece in order to seal the joint so rain cannot get in. There is also a ton of brush from the tree to be cleaned up as well.

All in all a successful day. I rewarded myself with some sushi. 😁

20221106_190504.jpg
 
Last edited:
Whilst I'm capable of making that, I don't think I'd want to inflict that on the poor hen. How can she dust bathe or straighten her feathers?
I know. It's cute but sad. Chickens are not meant to be dressed like a little dog. You know, dogs that are smaller than my cat.

20221025_091124.jpg
 

New posts New threads Active threads

Back
Top Bottom