ValarieF
🌈🤪😵💫💫🐣Insane Chicken Possy!🤪🐥🐤🐓🌛
Good you need to stay here and keep me company. We can video and photograph chickens and share.Rain keeps me from flying!![]()
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Good you need to stay here and keep me company. We can video and photograph chickens and share.Rain keeps me from flying!![]()
If I stay in one place for too long, I’m surely gonna get into trouble!Good you need to stay here and keep me company. We can video and photograph chickens and share.
Great work Bob! It's going to be an excellent roof.Good Progress
I made good progress on the roof today but had to run to my mom's around mid-day so could not finish. I will not be catching up on the thread this evening either. Sorry everyone.
Here is what I did get done in the roof.
To seal up the front of the roofline I am using 1/4 round plastic trim. It is the same height as the as the bend in the roof. I will be caulking the seam at the top of the roof to the 1/4 round to waterproof it. This also gives me something to square the roof with.
View attachment 3370536
Nest i needed to cut the panels to length. I marked all the "humps" in one panel and then used a small piece of molding to enable me to complete the guide line across the sheet.
View attachment 3370538
I then used the angle grinder to cut the panel to length.
View attachment 3370539
Once cut I checked to make certain I had not screwed up before cutting the other 2.
Looks good.
View attachment 3370540
As I need to cut 3 panels to the same length in order to cover the roof, I used the cut piece from the first panel to measure the other 2 to the same length.
View attachment 3370542
Once I had the panels cut to length I needed to cut them to width. I placed them on the roof and marked them by marking the roofline from below. I also numbered them so i can get them back into the same place after I took them back off. View attachment 3370543
I managed to get everything cut correctly. Now I just need to wait for a day with good weather to screw it down and caulk it.
View attachment 3370544
The chickies love me, treat time bsfl and cat foodI wish to thank BYC for my PFM ! Though my laptop is a POS I can still access my BFF’s and even order things COD on it. Thanks for making me feel like a CEO or a CELB member of this community. Party at my place next weekend. Everyone RSVP.![]()
BYOMW! Bring your own meally worms.![]()
What's newIf I stay in one place for too long, I’m surely gonna get into trouble!![]()
What a lovely picture of them eating together.It is Twofer Tuesday
Here are the Math Majors carefully dividing an apple core. I think I managed to capture Eli’s gold flecks that go nicely with her green sheen.
They are very difficult to get good photos of these two. Mainly because they never stand still - they are always speeding around to avoid Bernie.
View attachment 3371641
IF you are able to get a carabiner through the smaller welded wire, you should have that go straight to the eye bolt, and forget the ziptie. These carabiners would probably work well and be the easiest to 'deploy' in your situation. They come in assorted sizes. I've used a few and LOVE them.
I love black chickens.Been a busy couple of weeks, finally caught back up a couple of days ago. My work took 2 days off for each holiday, but I only get paid for half a day each, so have to make up the rest. Had a visit from one of my oldest friends last week which meant 2 days of crazy cleaning (new years cleaning, it was great.) Pretty much the only time we have had real company since moving here 4 years ago. And we are still trying to fix our washing machine, I think we finally have all the parts.
Twofers
View attachment 3371768View attachment 3371769
Some mugs
View attachment 3371770
Did you know split peas can sprout!
View attachment 3371771